Surefire Tips: How to Install a Peep Sight Without a Bow Press

Archery is a very technical sport. Whether you’re hunting for animals or participating in the game, you need to know how to install a peep sight without a bow press. 

Even the smallest tools can help you have the upper hand. For this reason, it’s always important to know your bow and make it battle-ready.

A peep sight might seem insignificant. But it is one of the essential things in your bow. Every arrow you launch, the peep sight makes sure it ends up in the right place.

 However, people often struggle to install a peep sight without a bow press; this article is to guide how you can install a peep sight without a bow press. 

What is a Peep Sight?

In layman’s terms, a peep sight to an arrow is what a rare view to a rifle. It helps you position your target correctly. 

It is a small sight that is positioned in the bowstring that lines with your eye when shooting. Giving you a clear target when shooting. 

Types of the peep sight:

Currently, many kinds of peep sights are used; the most common ones are: 

1. Self-aligning peep sight: 

This is a rubber tube that can be attached to the string of your bow. While this takes away a bit of your speed, this helps to target easy, and connecting this is much easier than others. 

However, it can also fall from the string, so make sure to have a few extras with you. 

2. Double slot peep sight: 

These are the most popular kinds of peep sight. They divide your bowstring into two parts and then help you target. You have to twist the string properly to keep them aligned. 

3. Triple slot peep: 

This is similar to a double slot peep, but here the string is divided into three parts. Due to three divisions, the line of sight is maintained very well. 

However, many archers don’t like the third-string popping in their line of sight. However, the string can get curled and be problematic; otherwise, it’s a great buy.

Also Read: Top Single Pin Bow Sight For Hunting

Steps to install a peep sight without a bow press:

Step 1 (Seating the string)

The string needs to be seated well enough for the peep to stay in place. For this, shoot 20 arrows into your target without your peep. This will seat your string well into the bow, and ready for the peep. 

Step 2 (Releasing tension from the string):

 If your string has too much pressure, it might tear from contact. So take it to poundage to remove any pressure from it. 

However, when you’re taking your bow in poundage, make sure the last bolts stay in place, and you don’t reach your pounding limit. Once the tension is low, you can get to the next step.

Step 3 (Attaching the peep sight): 

Now that the string has relieved some tension, it’s time to attach the peep sight. Part your string in halves or triplets and attach your peep sight. 

Use a string splitter to separate the strings, or you can also use a blade, but it’s a lot harder that way. Divide it slowly and then put your peep sight. Be extra careful not to damage anything. 

Step 4 (Positioning the D-Loop): 

 Once the peep sight is in place, pull the arrow to see whether the loop is in the right position. This is important because the direction and power of your arrow depend on the loop. 

Very gently pull it backward to check the position. If it’s not in place, try winding and unwinding the string to fix it. 

In short, these are the steps required to attach a peep sight without a bow press. However, all the steps are very technical and can damage your arrow if you don’t do it carefully. 


The technicalities of archery have always made it very alluring. It’s slightly challenging, but the end product is still much better. 

Your peep sight is your best friend when hunting or playing. However, not attaching it right can be problematic.

So be careful in choosing your product and follow the steps properly on how to install the peep sight without a bow press. 

Remember that the slightest mishaps can get you into trouble. That being said, good luck to the archer in you.

We will be happy to hear your thoughts

Leave a reply